Aluminum coil

‹

AlSiMgMn / 6082 / 3.2315 Aluminum Coil

›

‹

›

AlSiMgMn / 6082 / 3.2315 Aluminum Coil
Aluminum coil is the thickness of 0.2mm to 500mm below, width of 200mm or more, length of less than 16m aluminum material is called aluminum coil, 0.2mm or less for aluminum, 200mm width within the row or strip (of course, with the advancement of large equipment, the widest can be 600mm aluminum plate is more).

AlSiMgMn / 6082 / 3.2315 Aluminum Coil

Parameter
Chemical Composition
Mechanical Properties
Product NameAluminium coil(sheet)
Material1050,1060,3003, 3A21,5052.5005.5083.5A05,6061
Technical StandardJIS G3141,DIN1623,EN10130
Sheet0.15 mm- 2.0mm
Normal sheet2.0mm-6.0mm
Medium plate6.0 mmt-25.0mm
Plate25mm-200mm
Super thick platemore than 200mm
QualityApproved by SGS,ISO
Width914 mm, 1000, 1200, 1220mm or as customer's requirement
Length2000-30000mm
Surface Finishflat, stucco embossed, corrugated, smooth or orange peel embossed
Facingcompound with kraftpaper or Polysurlyn or Polykraft
PackageWater proof paper is inner packing,galvanized steel or coated steel sheet is outer packing , side guard plate,then wrapped by
seven steel belt.or according to customer's requirement
Payment termsT/T, L/C at sight,West Union,D/P,D/A,Paypal
Delivery time7-15 Days
Alloy%Si%Mg%Mn%Cu%Fe%Cr%Zn%Ti%Others%Al
EN AW-1050 A0.25Max0.05Max0.05Max0.05Max0.40Max–0.07Max0.05Max–99.5 Min
EN AW-1070 A0.20Max0.03Max0.03Max0.03Max0.25Max–0.07Max0.03Max–99.7 Min
EN AW-1100Si+Fe 0.95 Max–0.05 Max0.05 – 0.20––0.10 Max0.05 Max–99.0 Min
EN AW-20110.40 Max––5.00 – 6.000.70 Max–0.30 Max–Bi : 0.20 – 0.60Pb : 0.20 – 0.60Remainder
EN AW-20140.50 – 1.200.20 – 0.800.40 – 1.203.90 – 5.000.70 Max0.10 Max0.25 Max0.15 Max–Remainder
EN AW-20240.50 Max1.20 -1.800.30 – 0.903.80 – 4.900.50 Max0.10 Max0.25 Max0.15 Max0.15 MaxRemainder
EN AW-30030.60 Max–1.00 – 1.500.05 – 0.200.70 Max–0.10 Max–0.15 MaxRemainder
EN AW-31030.50 Max0.30 Max0.90 – 1.500.10 Max0.70 Max0.10 Max0.20 Max0.10 Max–Remainder
EN AW-6101A0.30 – 0.70.40 – 0.900.03 Max0.05 Max0.40 Max–––0.10 MaxRemainder
EN AW-60050.60 – 0.900.40 – 0.600.10 Max0.10 Max0.35 Max0.10 Max0.10 Max0.10 Max–Remainder
EN AW-63510.70 – 1.300.40 – 0.800.40 – 0.800.10 Max0.50 Max–0.20 Max0.20 Max0.15 MaxRemainder
EN AW-60600.30 – 0.600.35 – 0.600.10 Max0.10 Max0.10 – 0.300.05 Max0.15 Max0.10 Max–Remainder
EN AW-60610.40 – 0.800.80 – 1.200.15 Max0.15 – 0.400.70 Max0.04 – 0.350.25 Max0.15 Max–Remainder
EN AW-60630.20 – 0.600.45 – 0.900.10 Max0.10 Max0.35 Max0.10 Max0.10 Max0.10 Max–Remainder
EN AW-60820.70 – 1.300.60 -1.200.40 – 1.000.10 Max0.50 Max0.25 Max0.20 Max0.10 Max–Remainder
AlloyTemperUTS (Mpa)Yield Strength (Mpa)Elongation (%)

MinimumMaximumMinimumMaximumA 50mm (Minimum)
EN AW-1050 AF60–20–23
O609520–23
EN AW-1070 AF60–20–23
EN AW-1100O75110––25
EN AW-2011T4275–125–12
T6310–230–6
EN AW-2014O–250–13510
T4370–230–11
T6415–370–5
EN AW-2024O–250–15010
T3,T3510,T3511395–290–6
T8,T8510,T8511455–380–4
EN AW-3003F95–35–20
O9513535–20
EN AW-3103F95–35–20
O9513535–20
EN AW-6101AT6200–170–8
EN AW-6005T4180–90–13
T6270–225–6
EN AW-6351O–160–11012
T4205–110–12
T6290–250–6
EN AW-6060T4120–601412
T5160–120–6
T6190–150–6
T64180–120–10
T66215–160–6
EN AW-6061O–150–11014
T4180–110–13
T6260–240–6
EN AW-6063O–130––16
T4130–65–12
T5175–130–6
T6215–170–6
T66245–200–6
EN AW-6082O–160–11012
T4205–110–12
T5270–230–6
T6290–250–6
PRODUCT DISPLAY

AlSiMgMn / 6082 / 3.2315 Aluminum Coil

PRODUCT PACKAGING

Excellent package: Anti-water paper and plastic film+covered by iron sheet+ strapped with minthree strappingstrips+fixed on the iron or wooden pallets by strapping stripslt can effectivelyprotect products from corrosion andvarious climate changes during ocean transportation.

9.jpg
FAQ

Q1:Accepted delivery terms

A1:EXW, FOB, CFR, CIF, FCA, FSA, CPT, CIP, DAT, DAP, DDP, DDU

Q2:Accepted Payment Types

A2:T/T, L/C

Q3:What is your delivery time ?

A3:8000 tons of inventory guarantee immediate delivery, Non-stock products, delivery within 5-7 days.

Q4:Accepted payment currencies

A4:CNY, USD, EUR, JPY, CAD, AUD, HKD, GBP, CHF

Q5:What standard steel can you provide?

A5:We can provide various standards, such as: AISI, ASTM, ANSI, ASME, UNS, SAE, DIN, EN, GB, JIS, etc

Q6:How do you guarantee the product quality?

A6:CE, ISO certificate, supporting any third party inspection. A pre-production sample before mass production, final Inspection before shipment.

SIMILAR RECOMMENDED
MESSAGE
SEND